Bel ons op +32 (0)50/858.020

Cockpit SRS

Cockpit SRS
SKU: PB108
Only 1 left


Stock: in stock

Product Description



For Spektrum and Jeti satellites, Futaba S-BUSand Multiplex M-LINK receivers
All channels from the receiver are transferred using a three-core lead
Complete receiver redundancy, double the security
Complete battery redundancy: two batteries, two electronic switches, redundant output voltage with dual regulation
Spektrum with four satellites, Futaba with two S-Busreceivers, Multiplex with two M-Link receivers, Jeti with two satellites
High-resolution graphic OLED screen with 128 x 64 pixels
Ultra-simple menu-based programming using the SensorSwitch
Eleven channels + one channel for door sequencer
Downlink channel transmission for Spektrum and MPX
Unrestricted channel assignment for all output sockets, (channel output mapping)
Synchronised servo outputs for totallysimultaneous servo movements
Four-stage user-variable servo frame rate (12 ms, 15 ms, 18 ms, 21 ms)
Integral freely programmable door sequencer
The unit saves receiver data, such as "lost frames" and "failsafes", for all connected receivers - whether Spektrum, Futaba, Multiplex, Jeti. Data can be read out after the flight on the OLED screen
Four match-channels for two servos each; both servos individually variable
16-bit processor for high-speed, high-resolution signal processing
Signal amplification for a total of 12 channels and 21 servos
Direct transmission of battery voltages and capacities to the transmitter (downlink channels)
On-screen voltage display for each battery separately, with bar indicator
Residual capacity display for both batteries separately
User-variable servo voltage: choice of 5.9 V or 7.4 V
Minimum value memory shows any voltage collapses
Large-area heat-sink for high regulator capacity
Regulator monitor and regulator error indicator
Supports three battery types: LiPo, LiIon, NiMH / NiCd, LiFePo
Suppression of any servo feedback currents which might occur
Bus systems for seriell receivers from: Spektrum, Futaba, Multiplex, Jeti
Operating voltage: 4,0 Volts to 9,0 Volts
Power source: 
2 x two-cell LiPO batteries 7,4 Volts
2 x five-cell NiCd or. NiMH batteries
2 x two-cell LiFePo batteries 6,6 Volts (A123)
Current drain:
Power-on state approx. 130 mA 
Power-off state approx. 15 µA
Dropout voltage: approx. 0,25 V
Max. seriell receiver current
2 x 3 A (stabilised)
Max. servo current: 
according to efficiency of cooling
Peak 2 x 20 A
Servo signal resolution: 0,5µs
Signal frame rate:
User variable: 12ms, 15ms, 18ms, 21ms
Screen: OLED 128 x 64 pixels, graphic
Servo sockets: 21 sockets, 12 channels, 4 of them match-channels,
single-channel door sequencer with 6 servo sockets
Temperature range: - 30 °C to + 75 °C
Dimensions: 110 x 72 x 24 mm 
(incl. base plate)
Weight: 115 g
SensorSwitch: 15 g

Spare products

There are no products matching the selection.

Additional Information

Additional Information

Brand Powerbox
deliverytime Day