Bel ons op +32 (0)50/858.020

Electronic Pneumatic Retract and Brake Valve

Electronic Pneumatic Retract and Brake Valve
SKU: PILOT060

€138.99

This product is currently not in stock.

Deliverytime: Demand

Product Description

Details

Electronic Pneumatic Retract and Brake Valve

 

Save servo's and weight by using PILOT-RC's electronic pneumatic valve for retractable landing gear and associated brakes.

 

Choose two channels on your radio and associated switches/sliders for each channel,

set parameters for each channel as follows:

• Gear up -100% gear down +100%,

• Brakes off -100% brakes on +100%

 

Connect as easy as 1-2-3

1. Connect correct Rx leads from valve to chosen aux channels on receiver for landing gear and brake.

2. Connect with correct tubing the air lines going out to brake, gear up and gear down

3. Connect air in line to your air tank system and charge tank to recommended air pressure. (See warnings below).

 

Specifications:

• Size: 31 X 59 X 27mm (1.22"X 2.32" X 1.06")

• Operating Voltage: 4.8 - 8.4v (Direct from 7.4v LiPo, or through voltage regulator)

• Operating current: during pressure changes : 500mA, quiescent current: 25mA.

• Max Charge Pressure: 10bar, recommend operating pressure 5-8bar

• Weight: 65g(2.3 oz)

• Connectors: 3mm(outer diameter)

 

Safety Feature:

• Audible alarm is built in for retract channel. Should gear up accidently be selected a warning beep will sound and a 4 second delay occurs before gear retracts, giving pilot time to correct in cases of accidental retract when model on the ground.

 

Warnings!

• Do not exceed given maximum voltage of 8.4v

• Ensure you fully test for correct operation before attempting to fly your plane

• Do not charge cylinders more than 10bar.Electronic Pneumatic Retract and Brake Valve

 

Save servo's and weight by using PILOT-RC's electronic pneumatic valve for retractable landing gear and associated brakes.

 

Choose two channels on your radio and associated switches/sliders for each channel,

set parameters for each channel as follows:

• Gear up -100% gear down +100%,

• Brakes off -100% brakes on +100%

 

Connect as easy as 1-2-3

1. Connect correct Rx leads from valve to chosen aux channels on receiver for landing gear and brake.

2. Connect with correct tubing the air lines going out to brake, gear up and gear down

3. Connect air in line to your air tank system and charge tank to recommended air pressure. (See warnings below).

 

Specifications:

• Size: 31 X 59 X 27mm (1.22"X 2.32" X 1.06")

• Operating Voltage: 4.8 - 8.4v (Direct from 7.4v LiPo, or through voltage regulator)

• Operating current: during pressure changes : 500mA, quiescent current: 25mA.

• Max Charge Pressure: 10bar, recommend operating pressure 5-8bar

• Weight: 65g(2.3 oz)

• Connectors: 3mm(outer diameter)

 

Safety Feature:

• Audible alarm is built in for retract channel. Should gear up accidently be selected a warning beep will sound and a 4 second delay occurs before gear retracts, giving pilot time to correct in cases of accidental retract when model on the ground.

 

Warnings!

• Do not exceed given maximum voltage of 8.4v

• Ensure you fully test for correct operation before attempting to fly your plane

• Do not charge cylinders more than 10bar.

There are no products matching the selection.

Spare products

There are no products matching the selection.

Additional Information

Additional Information

SKU PILOT060
Brand Pilot-RC
deliverytime Demand