DPS-25 BATTERY BACKER 25A WITH ELECTRONIC SAFETY SWITCHES

Only 2 left in stock Shipping in 24 hours
€84.91 €70.17

Product Details

Description

DPS-25 Battery Backer 25A with Switches


The DPS-25 is used to safely and wear-free turn on a receiving system, provide it with high current for best servo performance while increasing security by using 2 separate receiver batteries for battery redundancy. Of course, the DPS-25 can also be used with a single battery as a pure receiver switch.


In order to be able to use the optimum performance of powerful and fast servos at all, a power supply is required which leads the necessary, high currents without losses directly to the servo sockets on the receiver.


In addition, the power supply must still work even if one battery fails. These security features are provided by the DPS-25, while minimizing susceptible components. This results in optimum protection against vibration and contact problems. The switching output stages used ensure the highest and lossless current flow, the internal resistance is considerably lower than the contact resistance of mechanical switches.


Due to the high cable cross-sections in the supply lines to the receiver, the maximum current is passed directly to the servo jacks, so the servos can develop their potential power and performance in the first place.


The DPS-25 has the tried and tested T-connector system as battery connection, and 3 original Futaba connector cables (contact socket) are mounted on the receiver side. These special contacts exclusively allow continuous currents of up to 6A, the highest value for this plug-in system at all. The cable cross section is 0.5mm. The negative conductor is made of silver. Thus, the full power of the battery backer or the battery used, can be forwarded directly to the servo cables.


NOTE: Input voltage = output voltage, no voltage reduction, the servos are supplied directly with the battery voltage!

Features

  • Double powersupply with electronic safety buttons
  • High current power FETs for 25A continuous current (40A short) with lowest internal resistance in the switch.
  • LED display for each battery
  • 0.5 sec safe interruption bypass for switch bounce and vibration
  • High current feed to 3x Futaba receivers with high quality gold contacts
  • Absolutely vibration-proof due to SMD technology
  • No mechanical wear
  • Ideal for all applications with strong digital and power servos
  • Power supply of the servos from 1 or 2 high-current batteries
  • Voltage drop max. 0.2V at 20A
  • Automatic switchover in case of failure of a battery
  • Only passive, fail-safe electronic components, no software
  • Input voltage 4.5 - 8.4
  • Total power: up to 300 W
  • Weight: 25 g
  • Dimensions: 46x17x11 mm

Properties

More Information
Manufacturer Futaba
Article reference FUTDPS-25