Optronics - SFuse 6A
SFUSE is designed to protect the on-board power supply system in the model and increase the receivers immunity to interference that may be communicated via the signal wires. SFUSE is connected between the servo and the receiver, on each servo in the model.
SFUSE not only protects the receiver and power system, but also offers other advantages appreciated in models with gasoline engines, where there is a lot of interference, and in models with longer power cables.
SFUSE is great when you are using fast servos that need additional capacitance on power supply.
SFUSE 6A is based on a resettable polymer fuse that is rated for a continuous current up to 6A and a pulse current is up to 50A. Today's servos do not generally reach such high current values and therefore the fuse is activated only in case of servo failure.
SFUSE contains an amplifier for servo pulse which stabilizes the voltage level of the servo signal on output to 5V. Increasing the range between logical levels increases the immunity to interference from external sources.The signal amplifier is further equipped with an input servo signal filter which filters out interference and unwanted signals that are transmitted over the wires to the servo. The amplifier is unidirectional and does not transmit further interference from the servo back to the receiver.
SFUSE features power supply filtering that is complemented by capacitors that reduce the voltage ripple that is transmitted to the receiver and deteriorates the performance of receiver.
SFUSE contains one input from receiver (female JR connector ) and one output (male JR connector) for servo with mechanical protection of disconnecting.
- Supply Voltage (V) : 5,0-8,4V
- Max. Input voltage : 10V
- Peak current : 50A
- Continuous current : 6A
- Weight : 5g
- Dimensions : 23x8x6mm