Bel ons op +32 (0)50/858.020

Wingstabi 16 incl. 35A double battery backer

SKU: MPX55015
Only 1 left

€239.89

Stock: in stock

Product Description

Details

Features
  • 3axis gyroscopic system (MEMS) for all surface models
  • 16 servo outputs
  • For each servo, the function is freely assignable, fits into any model application
  • ServoMatch function: Assign a function to several servos with individual servocuts
  • Completely any installation
  • WingStabi makes a simple programming of highend RC system from any simple remote control
  • Programmable via PC and APP (smartphone and tablet on Android basis)
  • 4 flight phases: 1. Off / 2. Stabilization for flying in wind / 3. Aerobatics and 3D flight / 4.Torquen
  • Natural & realistic flight feeling despite full stabilization
  • Despite extreme regulation, the model does not feel like a robot
  • Sensitivity of the 3axes separately or jointly adjustable via the transmitter.
  • MEMS sensors of the latest generation
  • Delta mixer & Vtailgate mixer & damper support
  • Realtime sensor diagram in the PC software
  • Design housing in anodized aluminum with integrated cooling ribs and eyelets
  • Controllable via external switch (on / off). Mechanical switches and magnetic switches from the MPX range
  • Strain relief / vibration protection for battery packs
  • For all current RC systems (Graupner, Futaba, Spectrum, MLink, Jeti, HiTEC, JR, Weantronic)
  • Integrated battery switch with 35 A output current
  • WingStabi with receiver saves space, weight and money. Minimizes sources of error and provides security
  • With MLink you have all the features of the MULTIPLEX DRpro receiver, including telemetry.
  • HOLD / FAILSAFE function
  • Telemetry / Feedback channel capability
  • Integrated sensor interface for connection of external sensor modules (max. 16)
  • Voltage and signal errors are indicated via separate LEDs
  • MULTImate compatible
  • Integrated PC interface
  • Serial servo output SRXL for Flybarless systems

The large 3-axis gyro system for all RC surface models

The tried-and-tested WINGSTABI technology for the demanding requirements with 16 servo outputs and an integrated battery switch with 35A output current.

Compatible with all current RC systems (Graupner, Futaba, Spectrum, M-Link, Jeti, HiTEC, JR, and others), they can use all this innovative technology packaged in a design housing made of anodised aircraft aluminium.

The advanced WINGSTABI software 1.2.8 allows:

  • New flap control: up to 6 flap wings and stirrers
  • Model templates for most MPX models - very comfortable!
  • Servo Match function
  • New mixers and control settings
  • Many improvements in operating comfort

Thanks to the latest MEMS sensors, the flight feeling remains very realistic, even in extreme control.

Battery Switch

The WingStabi Pro can be powered directly by up to two batteries or by suitable voltage regulators or BECs. The extremely high-performance potential of the WingStabi Pro requires the use of batteries or BECs with appropriate load capacity. The continuous power is 35A, while the peak power is much higher. The power supply (max. Two batteries ...) is connected directly to the Wingstabi Pro with the MPX plugs. In use, the battery / MPX connector is always charged with the higher voltage. If both voltages are exactly the same, both connections are loaded evenly. Both connections work separately, so it is possible to use different batteries/power supplies with different capacity, cell number, type. If only one battery/connection is used, this can be connected to BATT1 or BATT2. The integrated fuse clips on the battery terminals ensure a vibration-proof connection of the MPX plugs.

Spare products

There are no products matching the selection.

Additional Information

Additional Information

SKU MPX55015
Rating filter No
Brand Multiplex
Cellnumber No
cilinder No
crate No
helisize No
multirotortype No
planetype No
spanwidth No
color No
deliverytime No

You may also be interested in the following product(s)