Cockpit SRS

Hors stock Indisponible
379,00 € 313,22 €

Product Details

Description

PowerBox Cockpit SRS

Features

  • For Spektrum and Jeti satellites, Futaba S-BUSand Multiplex M-LINK receivers
  • All channels from the receiver are transferred using a three-core lead
  • Complete receiver redundancy, double the security
  • Complete battery redundancy: two batteries, two electronic switches, redundant output voltage with dual regulation
  • Spektrum with four satellites, Futaba with two S-Busreceivers, Multiplex with two M-Link receivers, Jeti with two satellites
  • High-resolution graphic OLED screen with 128 x 64 pixels
  • Ultra-simple menu-based programming using the SensorSwitch
  • Eleven channels + one channel for door sequencer
  • Downlink channel transmission for Spektrum and MPX
  • Unrestricted channel assignment for all output sockets, (channel output mapping)
  • Synchronised servo outputs for totallysimultaneous servo movements
  • Four-stage user-variable servo frame rate (12 ms, 15 ms, 18 ms, 21 ms)
  • Integral freely programmable door sequencer
  • The unit saves receiver data, such as "lost frames" and "failsafes", for all connected receivers - whether Spektrum, Futaba, Multiplex, Jeti. Data can be read out after the flight on the OLED screen
  • Four match-channels for two servos each; both servos individually variable
  • 16-bit processor for high-speed, high-resolution signal processing
  • Signal amplification for a total of 12 channels and 21 servos
  • Direct transmission of battery voltages and capacities to the transmitter (downlink channels)
  • On-screen voltage display for each battery separately, with bar indicator
  • Residual capacity display for both batteries separately
  • User-variable servo voltage: choice of 5.9 V or 7.4 V
  • Minimum value memory shows any voltage collapses
  • Large-area heat-sink for high regulator capacity
  • Regulator monitor and regulator error indicator
  • Supports three battery types: LiPo, LiIon, NiMH / NiCd, LiFePo
  • Suppression of any servo feedback currents which might occur

 

  •  Bus systems for seriell receivers from: Spektrum, Futaba, Multiplex, Jeti
  • Operating voltage: 4,0 Volts to 9,0 Volts
  • Power source:
  • 2 x two-cell LiPO batteries 7,4 Volts
  • 2 x five-cell NiCd or. NiMH batteries
  • 2 x two-cell LiFePo batteries 6,6 Volts (A123)
  • Current drain:
  • Power-on state approx. 130 mA
  • Power-off state approx. 15 µA
  • Dropout voltage: approx. 0,25 V
  • Max. seriell receiver current
  • 2 x 3 A (stabilised)
  • Max. servo current:
  • according to efficiency of cooling
  • Peak 2 x 20 A
  • Servo signal resolution: 0,5µs
  • Signal frame rate:
  • User variable: 12ms, 15ms, 18ms, 21ms
  • Screen: OLED 128 x 64 pixels, graphic
  • Servo sockets: 21 sockets, 12 channels, 4 of them match-channels,
  • single-channel door sequencer with 6 servo sockets
  • Temperature range: - 30 °C to + 75 °C
  • Dimensions: 110 x 72 x 24 mm (incl. base plate)
  • Weight: 115 g
  • SensorSwitch: 15 g

Propriétés

Plus d'infos
Manufacturer Powerbox
Référence d'article PB108
Type powerdistributor Powerbox