D100 V2 AC/DC duo charger (100/200W)

Description

SkyRC Duo D100 v2 AC/DC charger, for 1-6S LiPo/LiFe/LiIon/LiHV, 1-15S NiMH/NiCd, or 2-20V Pb batteries.

SkyRC D100 v2 is a twin-channel charger with two independent circuits which can charge batteries of varying chemistries (LiPo/LiHV/LiFe/Lilon/NiMH/NiCd/PB)simultaneously. Capable of operating as a power supply with the maximum output of 100W helps the hobbyists to power the DC equiments. With its unprecedented function of voice guide, even a freshman can use this charger without any hurdles. Additional feature including our "SCAN TO GO" either.

Voice Guide

Purposes to make the charger more user-friendly and customizable. A speaker supported English and Chinese separately have been included in the left side of the charger that can reduce the times for misoperation

Power Distribution

The charger supports power distribution between channel A / channel B and PSU under the total power of 100W in AC mode.

DC Power Supply

The ability of supplying 100W/13.8V DC power dramatically expands its usage scope, which is really an amazing partner for hobbyists to power the DC equipments.

Twin-channel Charger

SkyRC D100 v2 allows you to plug 2 batteries into one charger simultaneously, and it will intelligently and automatically charge 2 batteries at once.

Charge Master

The user can monitor pack voltage, cell voltage and other data during the charging, view charge data in realtime graphs, and can also control charging and update firmware from "Charge Master".

LiHV mode available

The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage of 4.35 V.

Features

• Voice guide
• DC Power Supply
• Power distribution management
• Scan to Go
• Lithium Battery balancer
• Discharge feature
• Program Data Store/Load
• Battery Meter
• Battery resistance meter
• Terminal voltage control (TVC)
• PC Control
• Maximum safety

• AC Input Voltage: 100-240V
• DC Input Voltage: 11-18V
• Charge Wattage: AC 100W(Support Power Distribution) DC 100Wx2:
• Discharge Wattage 10Wx2
• Charge Current: (0.1A-10.0A) x2
• Discharge Current: (0.1A-2.0A) x2
• DC Power Supply Output: 13.8V / Max. 100W
• Current Drian for Balancing Port: 300mA/cell
• Trickle Charging Current: 50mA-300mA & OFF
• LiPo/LiFe/Lilon/LiHV Battery Cell Count: 1-6S
• NiMH/NiCd Battery Cell Count: 1-15S
• Pb Battery Voltage: 2-20V
• Size: 153 x 140 x 67 mm
• Weight: 668 g