Futaba S-U300 Digitale Servo (0,19s/4,1kg/S.BUS)

Niet in voorraad Levertijd op aanvraag
€18,90 €15,62

Product Details

Omschrijving

The Futaba S-U300 is a low budget standard servo that replaces the older S3003, S148, FS100 servos.

A robust universal servo with a large positioning force of 41 Ncm. High vibration resistance and a long service life thanks to wireless assembly technology. The reset potentiometer has a 6-fold sliding contact with indirect drive. State-of-the-art technology at an affordable price.


Programmable using S.BUS2 technology. Of course, all S.BUS2 servos can be connected to conventional receivers with PWM modulation. The servos can be addressed in different ways:


1. With the handy programmer SBC-1

2. On the PC with the CIU-3 USB adapter

3. On the S.BUS connection of the transmitter


The following parameters can be set:

  • S.BUS channel assignment
  • Servo polarity
  • Servo type (normal / retractable undercarriage)
  • Soft start (on / off)
  • Mode selection in the event of signal failure Hold or Free
  • Soft servo run (on / off)
  • Servo position (servo tester)
  • Servo center adjustment +/- 300 µs (approx. 30 degrees)
  • Servo speed, 0.39 - 9 seconds per 45 degrees
  • Setting the dead band (dead band)
  • Servo travel setting left and right separately, approx. 50 - 175%
  • Starting power
  • Cushioning
  • Holding force
  • ID storage

Features

  • Powerful S.BUS2 digital servo with plastic gear
  • Low-wear potentiometer
  • Robust plastic housing
  • High resolution
  • High positioning accuracy


  • 60 ° actuating speed: 0.19 / 0.23 s (6.0 / 4.8 V)
  • Actuating torque: 4.1 / 3.2 kgcm (6.0 / 4.8 V)
  • Operating voltage: 4.8 - 6.0 V
  • Control frequency: 50 - 70 Hz
  • Weight: 36 g
  • Dimensions: 40.4 x 19.8 x 36 mm

Eigenschappen

Meer informatie
Manufacturer Futaba
Artikel referentie FUT01006009