MZ-24 PRO Hott 2.4Ghz radio

Omschrijving

Graupner mz-24 PRO HoTT-afstandsbediening (12 kanalen)

De mz-24 was de afstandsbediening van het jaar 2015 toen de FMT-lezers stemden. Graupner rustte niet op dit succes en ontwikkelde de verbeterde mz-24 PRO-zender met 12 kanalen - door professionals voor professionals. Dit pakket bevat de mz-24 PRO-zender, evenals een micro SD-kaart, zenderbatterij, oplader en vele accessoirekabels.

Groot kleurendisplay
De mz-24 PRO heeft een 3,5-inch kleurendisplay dat u in realtime alle relevante telemetriegegevens kan tonen. Gebruik het grote TFT-kleurentouchscreen om tot 30 modelgeheugens, 6 vluchtfasen en 5 lineaire en 3 curve-mengers te programmeren en te optimaliseren - rechtstreeks via de zender, zonder extra hardware.

 

Spraakuitvoer die u interesseert
De intelligente spraakuitvoer rapporteert telemetriegegevens, alarmen en variosignalen. De waarschuwingen kunnen worden ingesteld. De mz-24 PRO heeft een range test functie en waarschuwt tijdig voor verbindingsproblemen.

 

Telemetrie om u te informeren
De telemetriegegevens en modelinstellingen kunnen worden opgeslagen op een micro-SD-kaart of overgedragen via een USB-kabel. Evalueer uw vlucht en optimaliseer uw instellingen. Als 30 interne modelgeheugens niet genoeg voor u zijn, kunnen extra modellen worden opgeslagen op de micro SD-kaart.

 

Toekomstbestendig
Software- en firmware-updates kunnen eenvoudig worden uitgevoerd met de meegeleverde USB-kabel.

Features

• Built-in front speaker for voice and music output
• HoTT bi-directional 2.4GHz technology with 75 hopping frequencies
• 12 channels
• 3.5 TFT color touch display
• Intelligent voice output via speakers or headphones
• Real-time data transmission with optional sensors (vario, GPS, fuel, temperature, voltage, current, speed and much more)
• Teacher / student system wireless or with cable
• Multiple recipients can be bound
• micro-SD card slot
• 30 model memories
• Model copy function
• Can be updated via USB
• Numerous servo settings (travel, limitation, reversal, middle position)
• DualRate and Expo, separately adjustable for each flight phase
• 6 flight phases
• Helicopter type: 1 servo, 2 servo 180 °, 3 servo 120 ° (2 pitch or 2 roll), 3 servo 140 °, 4 servo 90 °
• Pitch curves (7 points) can be set separately for each flight phase
• Throttle curves (7 points) can be set separately for each flight phase
• Phase trims for pitch and gas
• Swashplate limiter function
• Swashplate mixing function
• 5 linear mixers
• 3 curve mixers
• Numerous flight model types from 1QR to 8-flap surfaces (1QR, 1QR1WK, 2QR, 2QR1WK, 2QR2WK, 2QR4WK, 4QR2WK, 4QR4WK)
• Elevator: 1 HR, 2HR, V-tail
• Snap roll function
• Aileron differentiation, separately adjustable for each flight phase
• Butterfly function
• Ball-bearing aluminum billet units (8 ball bearings in total)
• Red applications on the top of the transmitter
• 5000 mAh lithium transmitter battery
• New menu for channel sequencers
• Additional model types for car, boat and copter
• Menu for logical switches
• Menu for announcements, flight phases names are announced when switching, announcements can be placed on any switch, FW on / extended flaps on / extended, teacher, student etc.
• Up to 10 user language files can be imported and assigned to the transmitter.
• HF can be switched on and off via a safety query.
• Both clocks are freely configurable by the user, reset function via switch / button or by briefly tapping the number field
• The engine stop function can also be used for helicopters, the engine can be switched off in any gas position
• 3 different EXPO / DR values ​​can be switched via a 3-step switch
• All warnings can be used in relation to the model memory, ie different warnings for each model memory.
• It is possible to switch off the trim for mixed channels in the free mixer menu
• A reduction in QR differentiation is possible
• SnapRoll for sailors and surface models
• Auto trim function
• Simple and extremely fast binding
• Free channel mapping, transmitter and receiver mixing functions and all servo settings are easy to program
• Binding any number of receivers for channel expansion (max. 16 channels). The last bound recipient sends the telemetry data.
• Future-proof due to update capability via USB interface
• German-language menu navigation (other languages ​​on the enclosed SD card)

 

• Maximum security
• Extremely long range
• FHSS, frequency hopping over up to 75 channels
• Maximum immunity to interference thanks to optimized frequency hopping, wide channel spreading and antenna diversification
• IntelligenBuilt-in front speaker for voice and music output
• HoTT bi-directional 2.4GHz technology with 75 hopping frequencies
• 12 channels
• 3.5 TFT color touch display
• Intelligent voice output via speakers or headphones
• Real-time data transmission with optional sensors (vario, GPS, fuel, temperature, voltage, current, speed and much more)
• Teacher / student system wireless or with cable
• Multiple recipients can be bound
• micro-SD card slot
• 30 model memories
• Model copy function
• Can be updated via USB
• Numerous servo settings (travel, limitation, reversal, middle position)
• DualRate and Expo, separately adjustable for each flight phase
• 6 flight phases
• Helicopter type: 1 servo, 2 servo 180 °, 3 servo 120 ° (2 pitch or 2 roll), 3 servo 140 °, 4 servo 90 °
• Pitch curves (7 points) can be set separately for each flight phase
• Throttle curves (7 points) can be set separately for each flight phase
• Phase trims for pitch and gas
• Swashplate limiter function
• Swashplate mixing function
• 5 linear mixers
• 3 curve mixers
• Numerous flight model types from 1QR to 8-flap surfaces (1QR, 1QR1WK, 2QR, 2QR1WK, 2QR2WK, 2QR4WK, 4QR2WK, 4QR4WK)
• Elevator: 1 HR, 2HR, V-tail
• Snap roll function
• Aileron differentiation, separately adjustable for each flight phase
• Butterfly function
• Ball-bearing aluminum billet units (8 ball bearings in total)
• Red applications on the top of the transmitter
• 5000 mAh lithium transmitter battery
• New menu for channel sequencers
• Additional model types for car, boat and copter
• Menu for logical switches
• Menu for announcements, flight phases names are announced when switching, announcements can be placed on any switch, FW on / extended flaps on / extended, teacher, student etc.
• Up to 10 user language files can be imported and assigned to the transmitter.
• HF can be switched on and off via a safety query.
• Both clocks are freely configurable by the user, reset function via switch / button or by briefly tapping the number field
• The engine stop function can also be used for helicopters, the engine can be switched off in any gas position
• 3 different EXPO / DR values ​​can be switched via a 3-step switch
• All warnings can be used in relation to the model memory, ie different warnings for each model memory.
• It is possible to switch off the trim for mixed channels in the free mixer menu
• A reduction in QR differentiation is possible
• SnapRoll for sailors and surface models
• Auto trim function
• Simple and extremely fast binding
• Free channel mapping, transmitter and receiver mixing functions and all servo settings are easy to program
• Binding any number of receivers for channel expansion (max. 16 channels). The last bound recipient sends the telemetry data.
• Future-proof due to update capability via USB interface
• German-language menu navigation (other languages ​​on the enclosed SD card)

 

• Maximum security
• Extremely long range
• FHSS, frequency hopping over up to 75 channels
• Maximum immunity to interference thanks to optimized frequency hopping, wide channel spreading and antenna diversification
• Intelligent data transmission with correction function
• Range test and warning function
• Low voltage warning
• Extremely wide receiver operating voltage range from 3.6 V to 8.4 V (functional up to 2.5 V)
• Numerous fail-safe functions
• Key lock function against unintentionalt data transmission with correction function
• Range test and warning function
• Low voltage warning
• Extremely wide receiver operating voltage range from 3.6 V to 8.4 V (functional up to 2.5 V)
• Numerous fail-safe functions
• Key lock function against unintentional

• Channels: 12
• Model memory: 30
• Dimensions approx .: 205 x 194 x 115 mm
• Weight approx .: 970 g
• Frequency: 2400 ... 2483.5 MHz
• Modulation: 2.4 GHz FHSS
• Range: approx. 4000 m
• Current consumption: 670 mA
• Operating voltage: 3.4V to 6V
• Temperature range: -15 to + 55 ° C