Jeti Power ION 6200mAh 2S RX batt.

Nog 2 in voorraad Verzending binnen 24 uur
€84,91 €70,17

Product Details

Omschrijving

JETImodel Receiver Battery Power Ion 6200 2S2P
 
Power-Ion accumulators are battery packs suitable to power the receiv-er 
and servos in the model.
The main advantages of Power-Ion accumulators include high mechanical 
resistance due to keeping  in a metal case. The accumulators are also 
characterized by a long cycle life. No balancer is needed for their 
operation and in case the current is higher than 150A, short circuit 
protection is activated. Overcharge protection is activated if the 
charging voltage is higher than 5V per cell. 
 
The accumulators are functional even at very low or very high temperatures (-10 - +60°C).
Each pack is provided with one two-wire cable with the JR connector for 
charging and with one two-wire cable with the MPX connector for connection 
to the model. Both cables are of the same length.

The accumulators are supplied in a plastic case and are fastened to it by 
Velcro. The case itself is screwed to a model using anti-vibration rubber 
grommets, see the picture below. Pay attention to correct placing of the 
brass washer. Its wider part should be in contact with the assembly board 
to which the battery case is mounted to avoid extruding the material. 

Features

  • Nominal Capactiy: 6200mAh
  • Nominal Voltage: 7,2V
  • Charging End Voltage: 8,4V
  • Lenght of the leads (1x MPX + 1x JR ):  135mm
  • Weight: 230g (incl. Box) / 204g (without Box)
  • Dimensions: 104x47x50mm (incl. Box) / 70x39x40mm (with out box)
  • Duration Current max.:40A
  • Peak Current max.: 80A
  • Charge max.: 8A (at MPX Connector)

Eigenschappen

Meer informatie
Manufacturer Jeti
Artikel referentie HACK22985456
Capaciteit (mAh) 6.200,00
Batterij type LiPo
C Rate 02-20C
Aantal cellen 2 Cell