Wir verwenden Cookies, um Ihre Erfahrungen besser machen. Um der neuen e-Privacy-Richtlinie zu entsprechen, müssen wir um Ihre Zustimmung bitten, die Cookies zu setzen. Erfahren Sie mehr.
Tattu TA1200 Charger Compatible with Smart and Standard Battery
Product Details
Beschreibung
Tattu TA1200 Charger Compatible with Smart and Standard LiPo Battery
This charger is capable of charging 2 sets of lithium
batteries simultaneously. The maximum power output is 750W under 100-120V and
1200 W under 180-240V per channel. User can select between Charging mode and
Maintenance mode. Charging current is adjustable between 10A, 20A and 30A. It
also has over-current, over charging, over temperature, safety cut off, fast
equilibrium and status indicator functions. With the charging manager TA1200
and the chargers UB-MG-Fast/UB5 combined, single charging manager can connect
up to 5 sets of batteries simultaneously and charges alternately for the 5 sets
of batteries on basis of charging saturation from high to low. If the charger
TA1200 connects with 2 charging managers UB5/UB -MG-FAST, It can charge 10 sets
of battery simultaneously. With double LCD display equipped, the charger
automatically indicates real time charging status, charging voltage, charging
current, charging time, battery capacity and cell voltage.
Operation
The TA1200 charging manager is a dual channel charger with
independent outputs. Each channel operates independently. The following is a
single channel example. When the charger is used incorrectly or there is a
failure, the charger will display an error message. See examples below.
1. Startup and Self Test
Be sure all cable connections are correct. Power the unit
on. The LCD display, Led Indicator lights should
come on. When the charger completes, it’s self test the
buzzer will sound.
2. Operation Modes
Charging Mode: Charging Mode will balance charge the battery
quickly. Maintenance Mode: When a battery has been on the shelf for a long
period of time, it is recommended to use maintenance mode. If the battery life
declines or the battery is out of balance greater than 50mV, Maintenance Mode
will charge or discharge the battery using a small current to put the battery
into proper storage voltage.
3. Setting Working Current
Use the current switch to complete the current setting based
on battery capacity.
4. Charging
Long press the charge button for more than 2 seconds to
begin charging immediately, or charge will start automatically after 10 seconds
after connections are made.
1. Red Light On: the
charger is charging the battery and the LCD display indicates real time
charging status.
2. Green Light On:
Charging is complete.
Note: When using Continuous Working Mode, the charger
automatically runs a series of operations.
These automatic operations include starting, stopping,
testing and switching. When using Continuous Working Mode, the charger will
resume charging automatically if the battery is not removed within 30 seconds
of pressing the stop button.
Features
- Input: 100-240V 18A 50/60Hz
- Output: Max50.4V Max.25.0A
- Max Output Power: 100-120V Max Output Power 750W×2CH
/180-240V Max Output Power 1200W×2CH
- Type of Battery: LiPo/LiHV/Smart Battery
- Cell Count: 12S
- Channel Count: Dual Channel(10 Channels with 2 charging
managers)
- Balance Tolerance: ±20mV
- Input Protection: Over Current Protection
- Output Protection: Over Voltage/Under Voltage/Short Circuit/
Over Temperature/Reverse Polarity
- Working Environment Temperature: 0℃-40℃/32℉~104℉.
- Cooling System: Cooling Air
- External Upgrade Port: Micro USB
- Dimensions: ≈325×190×280.5mm
- Weight: ≈9.2kg
Eigenschaften
Manufacturer | GensAce |
---|---|
Article reference | GATA1200 |