Wir verwenden Cookies, um Ihre Erfahrungen besser machen. Um der neuen e-Privacy-Richtlinie zu entsprechen, müssen wir um Ihre Zustimmung bitten, die Cookies zu setzen. Erfahren Sie mehr.
TRS Release Spray (400ml)
Product Details
Beschreibung
External release agent for epoxy and polyester resins, PMMA
and polyurethanes
Easy to polish, soft release wax for spray application
(max curing temperatures of 120 °C)
Silicone-free
Application
Suitable substrates: practically all smooth surfaces such as plastic (GFK),
metal and glass, but also porous and absorbent materials such as wood, gypsum
and moulded ceramics, if multiple coats are applied. However, absorbent
surfaces are difficult to mould if the resin can flow into the pores and anchor
mechanically.
The fine spray facilitates applications in complex, multi-angled moulds. The
release spray can also be used as a sliding layer by multiple spraying without
intermediate polishing. This is necessary, for example, when manufacturing
wound components such as cylindrical tubes in order to be able to pull out the
winding cores again.
Processing
Shake can well before use. Spray from a distance of 20 - 30 cm. In
hard-to-reach areas, it is also possible to spray at an angle or overhead for
short periods.
New moulds are treated 2 - 3 times, whereby each layer is polished by hand with
a soft cotton cloth immediately after application. After complete drying, the
film can no longer be polished without streaks.
Remnants in the mould can be removed with white spirit or mechanically with
steel wool.
Features
Eigenschaften
Manufacturer | R&G |
---|---|
Article reference | RG1651051 |