Wir verwenden Cookies, um Ihre Erfahrungen besser machen. Um der neuen e-Privacy-Richtlinie zu entsprechen, müssen wir um Ihre Zustimmung bitten, die Cookies zu setzen. Erfahren Sie mehr.
Jeti MAXBEC (2S liXX / 5-6 NiXX - 5A / 12A peak)
Product Details
Beschreibung
JETI model MAX BEC
Linear regulator MAX BEC is a sophisticated tool for
regulating voltage in models which have a receiver and servos powered by 2 LiXX
cells or 5-6 NiXX cells. Servo voltage is constant during the entire flight
which results in smooth motion of the servos.
Required output voltage (5.0V, 5.4V, 5.7V, 6.0V) is selected
by a jumper plug.
MAX BEC can be supplied either by NiXX or LiXX cells,
recommended are 2 LiXX cells or 5-6 NiXX cells. Input voltage is indicated by
four LED´s. If the input voltage is above 7.0V, all three green LED´s are ON.
While the cells are gradually discharging, particular LED´s go OFF depending on
input voltage (lower then 7V, 6.7V, 6.45V). If the input voltage is under 6.5V,
the red LED goes ON indicating that cells are discharged (if using 2S LiXX then
it means that voltage of particular cells is under 3.25V).
Supply cells must be connected into input side with two 0.5
mm2 cables. There is also parallel-connected 3link with JR connector which is
intended for cells charging, without a need for disconnection of power
connectors. Maximum charging current is 0,5A (limited by connector).
Output voltage is extracted from output side with 2 links.
It is recommended to connect both 2-links, it results in higher reliability and
lower current loading on connectors. The connectors may be plugged in any
channel of the receiver.
On the output side, there is a switch extracted, which
activates the regulator. The switch is connected as “safe”; it means that
mechanical damage of joints or wires has no impact on BEC function.
Features
- Weight [g]: 28
- Dimensions [mm]: 50 x 25 x 10
- Sustained current [A]: 5
- Peak current (max 30s) [A]: 12
- Telemetry: No
- Operational temperature [°C] : -10 ... 130
- Recommended input voltage [V]: 5,5 ... 8,4
- Output voltage [V]: 5,0 / 5,4 / 5,7 / 6,0
- Idle current [µA]: 17
- Max. power loss [W]: 7
- Number of battery inputs: 1
- Input voltage max. [V]: 16
Eigenschaften
Manufacturer | Jeti |
---|---|
Article reference | JETI024 |
Type powerdistributor | BEC |