Wir verwenden Cookies, um Ihre Erfahrungen besser machen. Um der neuen e-Privacy-Richtlinie zu entsprechen, müssen wir um Ihre Zustimmung bitten, die Cookies zu setzen. Erfahren Sie mehr.
Damped brackets with spacer bolts for electric drives and combustion
Product Details
Beschreibung
Damped
brackets with spacer bolts for electric drives and combustion engines
Brackets
with rubber damping for installing an electric motors or combustion engines
into the R/C model. The motor mount can be screwed onto the four rubber dampers
on the head frame.
The bracket
consists of turned flanges and foot plates, which form a unit when plugged
together with a spacer sleeve. The motor mount sits in the rubber dampers
between the flange and the foot plate.
Advantages
of the bracket
- Damping
vibration peaks
- Noise
reduction
- Adjusting
the distance from the cowl to the back of the spinner
Adjusting
side thrust and down thrust
Adjustable spacer bolts made of turned aluminum to fit an electric motor or
combustion engine into the R/C model. The distance from the cowl to the back of
the spinner as well as the side thrust and down thrust can be adjusted
continuously by turning the thread.
The distances
from the motor frame to the rear edge of the motor frame can be continuously
adjusted between 20 and 55 millimeters (0.79 and 2.17 inches). If necessary,
the spacer bolts can be shortened to the desired length at five undercuts using
a hacksaw.
A washer
with a spherical surface is inserted on the spherical face of the spacer bolt.
When adjusting side thrust and down thrust, the wedge-shaped openings on the
contact surface are compensated up to approx. 4 degrees on all sides.
All holes
are designed for M5 screws. If necessary, they can also be drilled out to M6
size.
Designed
and made in Germany.
Required
accessories
Depending
on the thickness and material of the motor frame, M5 or M6 screws or
corresponding threaded rods with a length of approx. 90 to 120 millimeters
(3.54 to 4.72 inches) are required for fastening. These are not included in
delivery.
Eigenschaften
Manufacturer | Hacker |
---|---|
Article reference | HACK10108411 |