We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Saito FA-100 4-stroke Nitro Engine
Product Details
Description
Saito FA-100 4-stroke Nitro Engine
Saito's new FA-100 will turn an APC 14 x 8 prop 300 to 700 rpm more than either the Saito .91 or O.S. .91. At only 19.2 ounces (less muffler), it weighs nearly 2 ounces less than the O.S as well! The Saito FA-100 is not just a punched out .91. It features a newly tooled case that shares the mounting dimensions of the O.S. 91. This allows it to be used with the many after-market engine mounts already available to fit this engine.
The Saito 100 idled and transitioned beautifully from the first start due to the included new Hangar 9™ Super Plug (HAN3011) that now comes with all Saito engines. This plug greatly improves idle and transition in all four-stroke engines. After a short slightly rich break-in, we peaked the needles at 3-5/8" out on the high-speed and a ¼ turn in from flush on the low-speed needle.
Our staff commonly uses 30% heli fuel in Saito engines, as it not only gives better top-end performance but it runs smoother, gives a better transition, and runs cooler.
In flight the FA-100 was one smooth operator. Transition and idle were clean and crisp with instantaneous response. No dead sticks occurred in the first six test flights, despite purposefully long high-altitude idles, followed by rapid full-throttle transitions. The 30% helicopter fuel gave a noticeable boost in power, plus the added oil in the fuel adds a nice trail of smoke.
If you're looking for a powerful lightweight four-stroke to power your latest .60 through .90-size project, you don't have to settle on a 91. Check out Saito's new FA-100.
Features
- Mounting Dimensions: 115 x 60 x 128mm
- Prop Range: 13x9–14x10
- RPM Range: 2000–11000
- Cylinders: Single
- Total Weight: 20.9 oz / 585 g
- Crankshaft Threads: 8x1.25mm
- Muffler Weight: 1.4 oz
- Benchmark Prop: 14 x 8 APC
- Displacement: 1.04 cu. in. (17.10 cc)
- Cylinder Type: AAC
- Engine (Only) Weight: 19.5 oz / 552 g
- Muffler Type: Cast
- Bore: 1.14 in (29.0 mm)
- Crankshaft Type: Ball Bearing
- Power Type: Glow
- Stroke 1.02 in (26.0 mm)
Properties
Manufacturer | Saito |
---|---|
Article reference | SAITOFA100 |
Cylinder | 0-29cc |