Freewing B-24 Liberator Olive Drab 2000mm PNP

Description

FlightLine B-24 Liberator Olive Drab 2000mm (78") Wingspan - PNP - FLW401P

With humility and reverence, Aerobertics is proud to introduce the world’s first foam electric PNP B-24 Liberator, in remembrance of the crews who gave the ultimate sacrifice and those who carry on its memory. 

The FlightLine B-24 Liberator is approximately 1/16.7 scale, with a 2000mm wingspan and 1230mm length, and is constructed from EPO foam and reinforced with integrated aluminum, carbon fiber, plywood, and plastic structures.  Designed with input from the Collings Foundation, which operates the only flying B-24-J, “Witchcraft”.

Due to the many configurations of the real B-24, the model features modular design to allow each modeler to customize his/her model further.  A magnetic nose section allows owners to quickly swap between B-24 variants, the -D (“Greenhouse” nose), and the -J (“Emerson turret” nose), and the Upper Turret on both variants and the Nose Turret on the -J variant can be panned with an optional 9g servo.

Steerable tillers are pre-installed, including special provisions to fit FPV cameras in the nose with minimal modification. An internal wooden spine reinforces the bomb bay area, if a modeler chooses to install operating doors. An all new pilot figure sculpt depicts period accurate A-2 crew jacket, radio headset, and iconic “crusher” cap and insignia. 

Also for the first time at Aerobertics, an optional 3D-Printed Cockpit with complete instrument panel, controls, and seats is also available as a separately purchasable upgrade.  

Despite its very large size, primary assembly of the entire aircraft is completed with only 12 screws; glue is only required for cosmetic details such as antennas and windows.  A quick disconnect ribbon wire harness consolidates wiring into a central circuit board inside the fuselage. 

Each wing is removable with two screws, making this large aircraft extremely easy to transport.

A 70mm tall nose wheel and 85mm tall main wheels provide stable operation on grass runways and split flaps aid in low speed flight and landings

REQUIRES:

• 6 Channel radio
• 6 Channel receiver
• TWO 3 Cell 11.1V 5000 mAh or TWO 4 Cell 14.8V 3000 - 4000 mAh LiPo batteries with XT60 Connectors
• 4 Cell compatible battery charger
  

Features

• Includes two magnetic nose cones to alternate between -D and -J variants
• Panning nose turret and upper turret with pre-installed tiller arms
• Two decal sets included inside each paint scheme’s box
• Grass capable landing gear with 70mm tall nose and 85mm tall main wheels
• 12 screw primary assembly
• Removable wings with convenient ribbon wire harness
• Split flaps
• Vast customization options for FPV cameras, moving turrets, doors, 3D printed detail upgrades, etc
• Modeled with input from Collings Foundation, operator of last flying B-24J, “Witchcraft”

• Wingspan: 2000mm / 78.74in
• Length: 1230mm / 48.4in
• Weight: 2910g / 102.64oz (w/o battery)
• CG (Center of Gravity): 76mm from the leading edge of the wing at the root
• Power System: Four 3530-860kv Brushless Outrunner Motors
• Electronic Speed Control: Four 30A ESC, 5A BEC, Two XT60 Connectors
• Propeller / EDF: 9.5 x 7 Counter-Rotating
• Servos: 9g servos

• Landing Gear: Electronic retractable main gear and steerable nose gear with digital metal gear steering servo
• Required Battery: TWO 3 Cell 11.1V 5000 mAh or TWO 4 Cell 14.8V 3000 - 4000 mAh LiPo batteries with XT60 Connectors (required)
• Required Radio: 6 Channel (required)
• Ailerons: Yes / Elevator: Yes / Rudder: Yes / Flaps: Split / Lights: No
• Hinge Type: Mixed/Nylon Reinforced
• Material: EPO Foam

• Build Time: 2-4 Hours
• Recommended Environment: Outdoor