Wij gebruiken cookies om uw ervaring beter te maken. Om te voldoen aan de cookie wetgeving, vragen we uw toestemming om de cookies te plaatsen. Meer informatie.
Hacker - Senstrol 120A OPTO ESC (Sinus control)
Product Details
Omschrijving
Hacker Master Senstrol 120A OPTO Sinus ESC
Ref. 14000120
The
controllers of the Hacker MASTER Senstrol series are real sinus commutating
speed controllers developed and manufactured in Germany. The motor current is
controlled sinusoidally in order to achieve an optimal torque-per-ampere ratio
in the motor. Sinus commutation offers smoother motor running, less switching
losses and therefore less motor warming. The efficiency of the entire drive is
increased.
The Hacker
MASTER Senstrol speed controllers have been specially developed for the
Senstrol versions of our Q80, C50 and C54 motors. The motor status is
constantly monitored by the built-in motor identification chip and special
sensors in the motor.
Motor/controller
synchronisation
In order to
guarantee a 100% adaptation of the entire drive, we measure the motors
precisely and save the data on the chip built into the motor. It can only be
used if the Hacker MASTER Senstrol speed controller is connected to the motor
identification chip.
The motor
identification chip contains all the data relevant to the motor and provides
the necessary motor parameters during operation. This completely eliminates the
need to program the motor parameters separately. Many of these data can be
adjusted by the pilot himself according to individual requirements, but not
beyond the preset limit values. It is therefore no longer possible to overload
the motor.
Real sinus
speed controller
The Hacker
MASTER Senstrol is a real speed controller. Due to the speed mode specially
developed for our F3A and aerobatic pilots, the speed of the motor is
determined by means of the throttle stick. The speed remains constant for both
upward and downward passages. It is no longer necessary to set the
"brake". This finally allows the long-desired wish, particularly in
F3A aerobatics, to be able to control the braking effect of the motor exactly
and at any time.
Of course,
the Hacker MASTER Senstrol speed controller is the first choice not only for
our F3A customers, but for every pilot who wants to combine maximum performance
with maximum efficiency and smoothness.
Different
operating modes
In addition to the usual gas channel, a second switching channel can also be used, e.g. with a 2 or 3 step switch. For this purpose, the MASTER Senstol speed controller has a second JR / UNI connection cable to the receiver, so that the MASTER Senstrol can be switched in 3 different operating modes
- Protection
mode is motor off
- speed mode
for F3A / aerobatics
- Torque mode
Features
- Permanent phase current [A]: 120
- Operating voltage range [V]: 18 ... 50.4
- Dimensions [mm]: 91x70x18
- Weight [g]/[oz]: 125
- Programming: via JETI Box
Eigenschappen
Manufacturer | Hacker |
---|---|
Artikel referentie | HACK14000120 |
Opto / BEC | OPTO |
Max Stroom | 120,00 Ampère |