XFly
XF115PG-G
Here is the first twin-EDF racing flying wing
The Eagle twin 40mm EDF jet features a new 40mm EDF power system on both ends of the wing and a large battery bay in the middle of the fuselage.
Powered by a 4S Lipo battery, the two factory-installed 40mm EDFs allow this competition wing to exceed the power-to-weight ratio of 1:1.5, easily launch by hand, and perform vertical climbs with ease. Resistant plastic guards under the belly and wingtips allow the wing to land on rough surfaces. With an airfoil, performance EDF setup and gyro-assisted mixing, the Eagle is capable of delivering differential speeds and performing barrel rolls, flat spins, inverted flat spins and other difficult maneuvers and the top speed can exceed 180kmh. It is fully factory assembled and ready to fly right out of the box. Two bright colors are available and you won't be afraid to lose sight of the plane in the sky.
If you're looking for a manual launch race wing with more fun, look no further than the XFly Eagle!
Specifications
Technical Specifications
Content
Type of kit: | PNP |
Wingspan (mm): | 1019mm/40in |
Length (mm): | 383mm/15in |
Flying weight (gr) | 650gr |
Wing Surface Area: | 19.5dm² |
Wing Loading: | 35g/dm² |
CG (Center of Gravity) | 162mm from the leading edge |
Servos | 2x 9 gr standard gear |
EDF Diameter Class (mm): | 2 x 40 |
Blades: | 12 |
Power System | Brushless 2 x 1413-KV5000 |
Motor Type: | Out-Runner |
Electronic Speed Control | 2x20A |
Battery Type | LiPo-Accu |
Battery Cells: | 4s - 14.8v |
Battery Capacity (mAh) | 2.200 mAh, 2.600 mAh |
Surfaces | Ailerons, Elevons |
Landing Gear | Belly lander |
Material | EPO Foam |
Build time | 3 minutes |
Required Radio | 5 channels minimum |
Recommended pilot skill level | Intermediate, Advanced |