Streamline your wiring with the Direct-Connect Sensor Wire!
Say goodbye to the need for a Castle sensor harness adapter and enjoy a cleaner installation. The Direct-Connect Sensor Wire eliminates an additional connection point, resulting in a tidier setup.
One end of the wire features the standard ROAR sensor plug, which easily connects to the back of any sensored motor. The other end directly plugs into any sensored capable waterproof Castle ESC.
The Direct-Connect Sensor Wire is compatible with the following ESCs:
• Mamba Micro X
• Mamba Micro X2
• Mamba X
• Mamba Monster X
• Mamba Monster X 8s
• Mamba XLX2
• Copperhead 10
Choose from available lengths:
• 200mm (7.9")
• 250mm (9.8")
• 300mm (11.8")
Mamba Micro X Installation:
1. Unplug existing sensor harness (or dust cover) from ESC.
2. Plug in new direct connect sensor wire; mind the orientation by aligning the white wire to the corresponding whit dot on the side of the ESC.
Mamba X Installation:
1. Remove 2 screws beside capacitors, using 1.5mm hex.
2. Remove wire harness retainer.
3. Unplug existing sensor harness from ESC.
4. Plug in new direct connect sensor wire; mind the orientation by aligning the white wire to the corresponding whit dot on the side of the ESC.
5. Reinstall wire harness retainer and screws.
Simplify your wiring setup and enjoy a cleaner and more organized installation with the Direct-Connect Sensor Wire from Castle Creations.
