Freewing B-2 Spirit Bomber Twin 70mm EDF Jet – PNP
Few aircraft look as otherworldly as the B-2 Spirit. Its smooth flying-wing shape, with no conventional fuselage or tail, made it one of the most recognisable and talked-about aircraft ever built, and for many scale pilots a model of it has long been a dream rather than a real option.
Freewing makes that dream real with this 1/24 scale B-2 Spirit Bomber. A 2200mm wingspan, twin 70mm EDFs on 6S power and working clam-shell drag rudders give this foam stealth bomber outstanding presence on the ground and in the air.
This Plug-N-Play (PNP) version arrives with the power system, servos, retracts, lighting and the new Freewing EG01 6-axis flight controller already installed. You only add your own 6-channel receiver and radio.
Authentic Stealth Appearance
The B-2's complex surface is recreated with dozens of decals and paint applications in different colours and sheens. The result closely follows the subtle, layered look of the full-size bomber.
Plastic caps protect the intakes, nose cone, wing tips and the distinctive beaver tail. These details add realism and help the high-wear areas of the EPO airframe hold their shape.
Six DayBright LED lights highlight the wings and undercarriage. On an aircraft with such a thin profile they are especially useful, helping you read the B-2's orientation at a distance and in lower light.
Twin 70mm EDF Power on 6S
Two factory-installed 2952-2100Kv inrunner brushless motors drive a pair of 70mm 12-blade ducted fans. Each motor is controlled by its own 60A ESC with an 8A UBEC.
A single 6S 22.2V 4000–6000mAh LiPo with EC5 connector powers the whole aircraft. The system runs efficiently at lower throttle settings, so you can enjoy relaxed, scale-like bomber passes over the field.
The onboard electronics are designed to be powered only through the installed ESCs from the main flight battery. The receiver, servos and other electronics are rated for a maximum of 5.5V.
EG01 Flight Controller & Working Drag Rudders
A flying wing needs smart control, and that is the job of the pre-installed Freewing EG01 6-axis flight controller. Besides gyro stabilisation, it handles the B-2's complex drag rudder setup and its four moving trailing-edge surfaces, so you only need to connect a basic 6-channel receiver. No additional radio programming is required.
Just like on the real B-2, yaw is controlled by split clam-shell drag rudders. Moulded plastic doors keep them consistently aligned for dependable flight stability.
A clear vertical stabiliser is supplied as an option. It is barely visible in flight but reduces the load on the gyro system, and it gives extra security if you want to loop, roll, bank hard or dive this bomber in ways the original never would.
Scale Landing Gear with Full Suspension
The electric retracts use articulated aluminium suspension struts to soak up landing loads. True to the full-size aircraft, each rear main strut carries four wheels and the nose strut carries two.
Sequenced, full-coverage gear doors close the wheel wells for a clean aerodynamic finish. They are moulded in plastic and reinforced to keep their shape against the curved underside.
Plug-N-Play – Bring Your Own Receiver
This model is supplied without a receiver or transmitter.
The PNP configuration suits pilots who already fly a preferred radio system. Install a 6-channel receiver, bind it to your transmitter and the EG01 takes care of the B-2's complex control mixing.
Motors, fans, ESCs, all nine servos, the retracts and the LED lighting are factory-installed, so final assembly is quick and simple.
Easy Assembly & Transport
A 2200mm flying wing may sound difficult to transport, but the B-2 separates into three sections using just four screws and two ribbon connectors.
Assembly takes about one hour. The CG is marked on the fuselage at 385mm from the leading edge of the nose.
The spacious battery bay gives easy access to the 6S flight pack, the receiver and the EG01 flight controller.
Key Features
- Impressive 1/24 scale B-2 Spirit replica
- 2200mm wingspan for real flying-field presence
- Plug-N-Play configuration without receiver
- Pre-installed Freewing EG01 6-axis gyro flight controller
- No additional radio programming required
- Functional clam-shell drag rudder system
- Twin 70mm 12-blade EDFs
- Two 2952-2100Kv inrunner brushless motors for 6S
- Two 60A ESCs with 8A UBEC
- Nine factory-installed servos
- Electric retracts with aluminium suspension struts
- Four-wheel rear main struts and two-wheel nose strut
- Sequenced, full-coverage gear doors
- Six DayBright LED lights
- Detailed multi-colour paint and decal finish
- Plastic-capped intakes, nose cone, wing tips and beaver tail
- Optional clear vertical stabiliser
- Three-section design with four-screw disassembly
- Spacious battery bay
- Assembly in about one hour
Specifications
- Wingspan: 2200 mm / 86.6 in
- Length: 886 mm / 34.9 in
- Weight: 3200 g / 112.87 oz
- Scale: 1/24
- Material: EPO foam
- Hinge type: Nylon
- Motors: 2x 2952-2100Kv inrunner brushless, 6S
- ESC: 2x 60A with 8A UBEC
- EDF: 2x 70mm 12-blade
- Flight controller: Freewing EG01 6-axis gyro
- Battery: 6S 22.2V 4000–6000mAh LiPo, EC5 connector
- Receiver: Not included
- Radio: 6+ channel, not included
- Servos: 9, installed (7x 9g digital hybrid gear, 2x 9g digital metal gear)
- Landing gear: Electric retracts with aluminium suspension struts
- Lighting: 6 LED lights
- Ailerons / Elevator / Rudder: Yes
- Flaps: No
- CG: 385 mm from the leading edge of the nose, marked on fuselage
- Skill Level: Intermediate
- Age: 14 and up
- Completion Level: Plug-N-Play
- Recommended environment: Outdoors
- Approximate assembly time: 1 hour
What's Included
- Freewing B-2 Spirit Bomber Twin 70mm EDF Jet PNP
- 2x 2952-2100Kv inrunner brushless motors, installed
- 2x 70mm 12-blade EDFs, installed
- 2x 60A ESCs with 8A UBEC, installed
- 7x 9g digital hybrid gear servos, installed
- 2x 9g digital metal gear servos, installed
- Electric retractable landing gear, installed
- 6x LED lights, installed
- Clear vertical stabiliser, optional
Required to Complete
- Minimum 6-channel transmitter
- Minimum 6-channel receiver
- 6S 22.2V 4000–6000mAh LiPo battery with EC5 connector
- 6S-compatible LiPo charger
Receiver, transmitter, battery and charger are sold separately.
The Stealth Bomber – Ready for Your Radio at Aerobertics
The B-2 Spirit is one of the most striking shapes in aviation, and at 2200mm span this Freewing replica draws attention at any flying field.
With twin 70mm EDFs on 6S, working drag rudders, full-suspension retracts, scale lighting and the EG01 flight controller handling the complex mixing, this B-2 combines real scale presence with modern RC convenience.
At Aerobertics, we like giving pilots the freedom to set up their models their own way. This PNP version is the right choice if you already have a radio system and receiver you trust.
Plug in your receiver, charge a 6S pack and take the stealth bomber into the sky.
