Teil-Q CG Balancer M

Description

The rocker itself has stops and thus has a maximum deflection of 10° in both directions. This means that the model can no longer fall off the rocker, even if, for example, the model's battery is removed.

Furthermore, the surface stop has been arranged with a 10° slope. When the rocker is in the front end position (10°) at the stop, the model can be placed. In neutral position when weighing out, the surface stop does not interfere any more.

With the engraved scale, the center of gravity can be adjusted with millimeter precision.

The wooden parts are CNC-milled from high-quality and stable 15 mm birch plywood. The plug-in system makes the center of gravity scale additionally stable and thus also easy to assemble.

The wooden parts are glued with 3 mm neoprene rubber at the support points. So that the model is held securely and not damaged.

Operation:

1: Set the specified center of gravity for your model using the scale.

2: Move the rocker to the front stop position. Now it has exactly 10° deflection. In this position the stop can be used as an adjustment.

3: Your model will now no longer slip due to the rubber support. If it does, you can always check the correct position by moving the rocker to the front stop. The model can now be balanced. Also check the light gap at the base of the rocker. Adjusting the center of gravity in the front stop of the rocker has the advantage that in the neutral position the wing stop no longer interferes.

4: The rear stop is used to prevent the model from falling if, for example, the battery is completely removed.

Features

• Height rocker ball bearing: 250 mm
• Max. Model width with connector: 240 mm
• Max. Model weight: 25.1 kg
• Max. Position center of gravity of leading edge: 200 mm
• Max rocking angle: +/- 10