AR20400T 20 Channel PowerSafe Telemetry Receiver

Description

The Spektrum™ AR20400T PowerSafe™ receiver is a feature-packed 20 channel receiver with integrated full-range telemetry. Spektrum PowerSafe receivers are designed for models using numerous servos and accessories that draw excess current such as those found on giant-scale airplanes and jet models. They feature a robust power bus designed to manage high-current loads, as well as dual 13AWG battery input leads with IC3™ connectors for use with larger battery packs. This makes it possible to support high-current systems straight through the receiver without the need for a separate power distribution system.

If you have a DSMX®/DSM2® transmitter capable of 11ms frame rates, the AR20400T will deliver lightning-fast input-to-output response that is perfect for high-performance applications such as aggressive 3D , IMAC, and Turbine airplanes. Each receiver includes 4 SRXL2 remote receivers that take full advantage of Spektrum MultiLink™ technology. This patented technology eliminates the reflected signal fading and antenna blind spots that can affect all 2.4GHz systems, helping insure a solid connection between you and your aircraft. As an added measure of safety, the Spektrum designed the AR20400T receiver with a proprietary soft switch. Allowing servo current to be routed around the switch, so, should the switch fail for any reason, power to the system will not be interrupted.

A ground-breaking feature on the AR20400T PowerSafe Receiver is the built-in receiver battery energy sensors. Giving pilots added awareness of the load and mAh used by the servos, retracts, lights, etc. used by each battery.

Each come with built-in connection ports for RPM, Flight Pack Voltage and Temperature sensors as well as an X-Bus port for additional telemetry options.

Features

• Patented PowerSafe™ redundancy system with dual 13 AWG battery leads with IC3 connectors. Perfect for power hungry aircraft and high current servo applications drawing up to 35A (50A max burst)

• Forward programmable for easy adjustments to failsafe settings, servo frame rate settings and more

• Micro USB port for easy product registration and firmware updates

• 12V capable for use with 12 volt servo applications (must be activated via Forward Programming)

• Integrated battery capacity monitor automatically reports the battery capacity used during flight and can reset automatically when fully charged batteries are installed

• Integrated Black Box telemetry log saves all telemetry data automatically when a Micro SD card is installed (Micro SD card not included)

• Integrated status LED provides helpful information during start up, warnings and mode indicators

• SRXL2 connectivity for easy, one wire connection to supported devices

• Ready to use with Spektrum Smart ESC for one-wire telemetry data without the need of modules, links and wires

• Receiver pack energy & voltage sensor and flight log telemetry data available without the need for additional sensors

• Full range telemetry with integrated barometer to provide altitude and vario telemetry without additional modules

• Included Soft Switch allows servo current to be routed around the switch, so if the switch fails for any reason, power to the system will not be interrupted.

• Rubber grommet hard mounts and minimalistic labeling helps produce the cleanest model setups

• Capable of high-speed 11ms frame rates

• Binding is easier than ever with four options to initiate the bind process

• Integrated telemetry with built-in ports for RPM, flight pack voltage, temperature sensors and X-bus for telemetry sensor expansion

• Compatible with all Spektrum DSM2 and DSMX transmitters

• Not compatible with Spektrum AS3000 Stabilization Module

• Not compatible with DSM2 AIRMOD JR Module (SPMMSJR720)

Specifications : 

• Product Weight : 3.0 oz (86g)
• Product Width : 2.56" (65 mm)
• Range : Full
• Resolution : 2048
• Telemetry : Yes
• Application : Air
• Band : 2.4GHz
• Bind Method : Bind Button
• Channels : 20
• Data Port : No
• Failsafe : Yes
• Flight Log Compatible : No
• Input Voltage : 3.5-12.6V
• Modulation : DSMX/DSM2
• Product Height : 0.71" (18 mm)
• Product Length : 2.71" (69 mm)