Pilot RC - FC1 3D Elster Jet 120" (3.05M) ARF Kit With Retracts (Version 2)
Pilot-RC
PILFC1120V2
Artikel op bestelling bij leverancier
Dit artikel hebben we niet op voorraad; het wordt voor u bij onze leverancier besteld. De levertijd is afhankelijk van de beschikbaarheid bij de leverancier.
€ 4.799,00€ 3.966,12 excl. BTW
Pilot-RC is very proud to announce a new collaboration with the undisputed pioneers of 3D jet flying and designers of that very first 3D J10, Ralph and Enrico from Elster Jet.
This new collaboration has led to Pilot-RC to produce their latest design, the FC1.
Designed to be both precise and highly capable in normal aerobatics and also extremely agile and light for 3D flying. Elster’s background in 3D jet flying has led to a number of innovative solutions that assure a light, strong and extremely capable and fun new aircraft to fly.
Please note : This kit is version 2 and includes a UAT, fuel tank, Vector thrust pipe, fuel dot, fuel tank vent, servo extension wire,hardware. Electric retract gear with brake
SPECIFICATIONS:
Model:
FC1
Wingspan:
74.8″ (1,900mm)
Length:
120″ (3,055mm)
Wing area:
1,734″2 (11,190cm2)
Weight:
31-32.5lbs (14-14.7kg) with JetCat P220Rxi turbine and full UAT
FEATURES:
German design, by Ralph and Enrico from Elster Jet, designers of the first J10’s
Extremely lightweight full composite construction especially designed for outstanding 3D performance
Painted outside the mold so no seam lines
Ultra strong and light weight landing gear mounts, with factory installed blind nuts so mounting is just plug and play
Split fuselage design is joined with 5 screws, with only batteries and nose gear installed in the front section, meaning very easy connections and quick assembly at the field
Specially designed easy access to turbine for speedy installation
Wings and elevator are secured from the top
Removable wing and elevator for easy transport
Please note that the FC1 is designed specifically for aerobatics and 3D vectored flight, with light weight being key. It is not designed to be used as a full power, high speed race plane.
INCLUDED HARDWARE:
Complete air frame (including carbon wing-tubes and preinstalled and painted fibreglass control horns)
Servo extension leads
Vector thrust pipe
4.500ml fuel tank
250ml UAT tank
Pre-prepared pushrods with ball links
REQUIRED HARDWARE:
Turbine 140-190N for normal sport flying
Turbine 200-260N for 3D vector flight – Avoid high speed, high G flying
Servos: Total x10 (x9 standard size + x1 medium size)
x9 standard size high torquex2 for ailerons (minimum 20kg)x2 for flaps (minimum 40kg)x1 for vector elevator (minimum 25kg)x1 for vector rudder (minimum 25kg)x2 for elevators (minimum 40kg)x1 for rudder (minimum 40kg)
x1 medium size servo for steering (size: 35x15x30mm)
Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.
Available and orderable in 3 versions and all the schemes shown in the pictures.
Without gear combo (Version 1) :
Pilot-RC FC1 kit
Requires servos and turbine of choice.
Include vector thrust pipe
Landing gear combo (Version 2) :
Pilot-RC FC1 kit
Pilot-RC electric landing gear & brakes set
Requires servos and turbine of choice.
Include vector thrust pipe
Turbine Ready Combo (Version 3) :
Pilot-RC FC1 kit
Pilot-RC electric landing gear & brakes set installed
Pilot-RC servos and extension wires, all installed
Standard dual wall thrust pipe, UAT, fuel tank, fuel dot, fuel tank vent, all installed
Requires your own turbine of choice.
Include vector thrust pipe
General Info
Brand
Pilot-RC
Item Nr
PILFC1120V2
Airplane - Specs
Material
Full composite
Wingspan (mm)
1900
Model Length (mm)
3055
Take-off Weight (g)
14500
Airplane - Functions
Controls
Rudder
Retractable Landing Gear
Elevator
Ailerons
Flaps
Motor
Required Radio (Not included)
Min. 8 Channel
Airplane - Power System
Power System
Not Included (See Needed to complete)
Airplane - Electronics
Receiver
Not Included
Qty of Servos
10x Servos | (Not Included | See Needed to complete)
